6.1.3 Certifications / Registrations / Declarations - Intel SSR212CC Technical Product Specification

Intel® Storage System SSR212CC

6.1.3 Certifications / Registrations / Declarations

UL Certification (US/Canada)
CE Declaration of Conformity (CENELEC Europe)
FCC/ICES-003 Class A Attestation (USA/Canada)
VCCI Certification (Japan)
C-Tick Declaration of Conformity (Australia)
MED Declaration of Conformity (New Zealand)
BSMI Certification (Taiwan)
GOST R Certification / License (Russia)
Belarus Certification / License (Belarus)
RRL Certification (Korea)
IRAM Certification (Argentina)
Ecology Declaration (International)
GB4943- CNCA Certification (China)
6.1.4 Component Regulation Requirement Need to Support System Level Certifications
Component Power Supplies must have the following certifications:
UL, cUL
German Bauart
CNCA China Certification
Ctick DOC
BSMI DOC
RRL License
CE DOC
CB Report (including all national deviations).
All peripheral devices, such as CD ROMS, Disk drives, Tape drives shall have the following
certifications: UL or CSA NRTL, CSA or cUL, and TUV or VDE and SEMKO or NEMKO or
DEMKO or FIMKO, CE, and FCC.
All Fans shall have the minimum certifications: UL and TUV or VDE
All current limiting devices shall have UL and TUV or VDE certifications and shall be suitable
rated for the application where the device in its application complies with IEC60950.
All lithium batteries shall be UL recognized and battery circuits are to have suitable reverse bias
current protection for the application it is used in.
All printed wiring boards shall be rated UL94V-0 and be sourced from a UL approved printed
wiring board manufacturer.
All connectors shall be UL recognized and have a UL flame rating of UL94V-0.
All wiring harnesses shall be sourced from a UL approved wiring harness manufacturer. SELV
Cable to be rated minimum 80 V.
All plastics used must be made of a UL recognized material, and have the appropriate flame
ratings mandated by IEC60950 per system level requirements. All plastics parts shall be
manufactured by an UL approved fabricator and the parts shall be marked with the appropriate
UL traceability markings. Markings to include:
Plastic Fabricators name and/or UL Fabricator ID
Material Name (for example GE, C2800)
Date Code
Revision 1.2
Regulatory Information
33