Intel SSR212CC Technical Product Specification page 10

Feature Summary
®
Intel Storage System SSR212CC Hardware Feature Summary
Storage Capacity
Drive Bays
Hard Disk Drive
Supported
Processor
Memory Capacity
Memory Type
DIMM Slots
Enclosure Controller
Temperature Sensor
SATA Compliance
Connectivity
Front Panel
LEDs
Hard Disk Drive Carrier
LEDs
Back Panel
Buttons and Switches
I/O Connectors
Power Receptacle
Chassis
Form Factor
Height
Width
Depth
Weight
Color
Rack Support
2
Expandable to 3.0 TB – using twelve 250 GB drives.
Expandable to 4.8 TB – using twelve 400 GB drives.
Expandable to 6.0 TB – using twelve 500 GB drives.
12 Serial ATA (SATA) Hot Pluggable.
3.5 inch SATA I & SATA II.
NOTE: For specific drive family and capacities supported, please refer to the
SSR212CC Tested Hardware and OS List (THOL).
A single Low Voltage Intel® Xeon® processor 2.8 GHz with 800
MHz system bus and 1MB L2 cache.
Expandable to 12 GB maximum, using DDR2-400 memory.
Synchronous Dynamic Random Access Memory
DDR2-400, Registered, ECC.
Six 240-pin DIMM sockets.
On-board Vitesse* VSC055 micro-controller.
Two temperature sensors are located on the backplane that allows drive
cage temperature monitoring by enclosure management.
SATA 1.5, 3.0.
Internet Protocol Small Computer System Interface (iSCSI) or Microsoft*
Windows* Common Internet File System (CIFS), via Dual GB Ethernet.
3x: Fault, ID, Power.
2x: Activity, Fault.
Power button, Reset button.
1x RJ-45 COMB Serial port, 2x RJ-45 Ethernet ports, 1x DB-15
Video connector, 1x 2.0 USB port, 1x Stacked PS/2
Mouse/Keyboard connector.
1x IEC AC per installed power supply module.
2U rack-mount chassis
86.7 mm, 3.41 in
447 mm, 17.6 in
631 mm, 24.8 in
As shipped (zero drives): approximately 19.1 kg, 42 pounds
Fully configured (twelve drives): approximately 30.4 kg, 67 pounds
Shipping container: 3.2 kg, 7 pounds
Black
Rail mount, compatible with four-post rack mount only, and
compliant to the SSI Server Rack specification and EIA 310-D.
Revision 1.2
Intel® Storage System SSR212CC
(
SDRAM),