Intel SSR212CC Technical Product Specification page 11

Intel® Storage System SSR212CC
System Cooling
Fans
Power
Configuration
Max AC input current
(PS Module)
Max +3.3 V output
(PS Enclosure)
Max +5 V output
(PS Enclosure)
Max +12 V output1
current
(PS Module)
Max +12 V output2
current
(PS Module)
Max +12 V output3
current
(PS Module)
Max -12 V output
current
(PS Module)
Max +5V Standby
output current
(PS Module)
Environment
Ambient Temperature
Relative Humidity
Acoustics
Electrostatic
Discharge
Safety Compliance
Argentina
Canada
China
Revision 1.2
Chassis includes three dual rotor and two single rotor 40 mm hot-
swappable redundant system fans for cooling the hard drives,
baseboard and SATA Host Bus Adapter (HBA) cards.
The Power supply enclosure contains one 60mm fan.
500 W continuous, 1+1 redundant power supplies. Intel Storage
System SSR212CC ships with one 500W power supply
7.2 Amperes at 110 Vrms, 3.5 A at 220 Vrms (each power supply
module)
20.0 A
(total combined power for the+ 3.3 V and +5 V outputs should not
exceed 120 W).
20.0 A
(total combined power for the+ 3.3 V and +5 V outputs should not
exceed 120 W).
18.0 A
(total combined power for the +12 V outputs should not exceed
360 W).
18.0 A
(total combined power for the +12 V outputs should not exceed
360 W).
18.0 A
(total combined power for the +12 V outputs should not exceed
360 W).
0.5 A (each power supply module)
2.0 A (each power supply module)
Operating (system): 10 degrees Celsius to +35 degrees Celsius,
with maximum change not to exceed 10 degrees Celsius per hour;
non-operating (system): -40 degrees Celsius to +70 degrees
Celsius.
Non-operating: 90% @ 35 degrees Celsius non-condensing
< 7.0 BA (rack-mount) in an idle state in an normal office
environment (23 degrees Celsius)
15 KV per Intel test specification
IRAM
UL60950 – CSA (60950 (UL and cUL)
GB4943- CNCA Certification
Feature Summary
3