Run Mode; Personality; Id Address - SHOWTEC Spectral CYC2000 Product Manual

Run Mode

• Enter the RUN MODE mode to set the desired working mode:
- DMX mode is used when working with a DMX512 controller to control the Spectral.
- SLAVE mode is for using the device during a Master-Slave operation.
When the fixtures are in Auto program operation, the RUN MODE does not work.

Personality

Enter the PERSONALITY mode to select a DMX mode: TOUR, BLOCK1, BLOCK2, ARC1, AR1+D, ARC2,
AR2+D, AR2+S, HSV.
TOUR: 13 channels
BLOCK1: 9 channels
BLOCK2: 15 channels
ARC1: 3 channels
AR1+D: 4 channels
ARC2: 5 channels
AR2+D: 6 channels
AR2+S: 7 channels
HSV: 3 channels

ID Address

Enter the ID ADDRESS mode to set the desired ID ADDRESS; range ID1 – ID66.
15