Control Panel; Dmx Addressing Without Id Addressing - SHOWTEC Spectral CYC2000 Product Manual

The Spectral CYC2000 has a total of 9 DMX channel configurations, referred to as Personalities.
The 9 personalities are [TOUR, BLOCK1, BLOCK2, ARC1, ARC1+D, ARC2, ARC2+D, ARC2+S, HSV].
Each of the different personalities can be accessed from the control panel.

Control Panel

A. Display
B. MENU Button
C. ENTER Button
DMX512 ADDRESSING WITHOUT ID ADDRESSING
1) Connect a DMX controller (example 50720 Showdesigner 1024) to the series of Spectral CYC2000„s.
2) Each Spectral CYC2000 has 15 DMX channels (DMX address LED Par #1=1, Par #2=16, Par #3=31,
Par #4=46, etc.).
3) The ID address has not been set, so therefore when using the controller CH15 must be inactive
(CH15=0). It is also possible to deactivate the ID address, by selecting ID OFF from the Settings menu.
4) Any DMX address in the range from 001 to 512 may be used.
Note: When using the Spectral CYC2000„s, the CH15 ID function must be inactive (CH15=0).
D. Up Button
E. Down Button
Showdesigner 1024 (50720)
10
Fig. 5