Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Par 56 COB 100W 4000K with 1 m power cable Color frame ...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Par 56 COB 100W 4000K • The user is responsible for correct positioning and operating of the Par. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. • This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
Page 6
Par 56 COB 100W 4000K The Par can be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place.
Par 56 COB 100W 4000K Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Par 56 COB 100W 4000K Description of the device Features The Par 56 COB 100W 4000K is a theatre spotlight fixture with high output. Input voltage: 110-240V AC, 60/50 Hz Power consumption: 100W Light source: 100W COB LED ...
Par 56 COB 100W 4000K Installation Remove all packing materials from the Parcan 56 COB 100W 4000K. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing.
Suspect two potential problem areas as: the power supply and the LED. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LED. Return the Par to your Showtec dealer. 03) If both of the above appear to be O.K., plug the unit in again.
Need help?
Do you have a question about the Par 56 COB 100W 4000K V1 and is the answer not in the manual?
Questions and answers