Table of Contents
Advertisement
Button/
Connector/LED
Label
Type
N/A
Power
N/A
Logging
Tracking
Position
INS
INS
ALN
ALN
HOST
4
Table 2: ProPak6 - Front Label Definitions
LED States
Off
Solid red = Valid power
Solid green = Operational mode
Off
Solid green = >40% memory available
Solid amber = 20-40%
Solid red = <20%
Alternate green/amber = busy
Off = 0 satellites
Solid red = 1-3 satellites
Solid amber = 4-5 satellites
Solid green = 6+ satellites
Off = no fix
Blink amber = single point
Solid amber = converging accuracy
Solid green = converged accuracy
Blink green = PSR/PDP corrections
INS
Off
Solid red = active
Blink red = error
Alternate red/amber = orientation or initial
position
Alternate green/amber = solution free
Solid amber = aligning
Blink amber = high variance
Green solid = solution good
Blink green = alignment complete
ALN
Off = no dual card/<4 satellites
Solid amber = FLOAT solution
Solid Green = fixed solution
Off
Solid red = idle
Blink red = active
Description
Power button and status LED
Press and hold the power button a
minimum of 3 s and maximum of 10 s
to power down the ProPak6
Logging button with user configurable
status LED
Indicates number of satellites being
tracked by the corresponding receiver
Indicates satellite position status for
the corresponding receiver
INS status indication (SPAN
configuration only)
ALIGN heading status indication (Dual
antenna configuration only)
USB Host (Type A) connector -
ProPak6 built in USB Host with status
LED
Advertisement
Table of Contents
