Table of Contents
Advertisement
4. Configure the ICOM ports using the ICOMCONFIG command.
5. If required, configure port security using the IPSERVICE command.
6. If using, configure NTRIP.
7. Issue the SAVECONFIG command to save the configuration
8. On a Wi-Fi Client, scan for a ProPak6 and connect to it. When prompted, enter a password and press
OK:
The default password is the Product Serial Number (PSN) located on the bottom of the ProPak6.
9. Configure network properties on the connected Client computer to use a static IP address.
Refer to the
and configuration instructions.
Refer to the
and command details.
10
ProPak6 User Manual
OEM6 Family Firmware Reference
to
Non-Volatile Memory (NVM).
(OM-20000148) for detailed installation
Manual-OM20000129 for log
Advertisement
Table of Contents
