Table of Contents
Advertisement
Pairing
5. Issue the BLUETOOTHDISCOVERABILITY ON command to allow Bluetooth devices to locate and pair
with the ProPak6.
6. If prompted, enter the PIN confirmation (ProPak6 default pin number 0000). Accept or log
BLUETOOTHSTATUS to verify pass code.
7. Issue the BLUETOOTHDISCOVERABILITY OFF command to turn off Bluetooth discovery.
Connecting
8. Determine the serial port assigned to Bluetooth for the connected computer (COM port X) and connect
to the device over this port.
Once a device is paired with the ProPak6, it is automatically detected and a connection
established once in range if Bluetooth is enabled. Refer to the
Reference
WI-FI CONFIGURATION
When the ProPak6 Wi-Fi radio is enabled, it can be configured to act as a Access Point (AP) or Client.
Wi-Fi AP (default)
1. Connect the ProPak6 to a computer using one of the communication ports and turn power on.
2. Log WIFIAPSTATUS ONCHANGED to view connection status.
3. Once powered, the radio is automatically enabled and the LED on the front of the ProPak6 lights blue
(it may take up to 10 seconds for the AP to become available).
Manual-OM20000129 for any log and command details.
OEM6 Family Firmware
9
Advertisement
Table of Contents
