Table of Contents
Advertisement
NOVATEL CONNECT™
Once installed, NovAtel Connect provides a graphical interface to establish communication, control and
monitor the operation of your NovAtel receiver.
Go to
www.novatel.com/support/firmware-software-and-manuals/firmware-software-updates/
novatel-connect/
Establishing a New Receiver Connection
The first time a serial port is opened to communicate with the receiver, complete the following:
1. Launch Connect from the Start menu folder specified during the installation process. The default
location is Start | All Programs | NovAtel Connect.
2. Select New Connection from the Welcome window.
In the New Connection window:
3. Enter a name for the connection.
4. Select a Device Type to use to communicate from the drop list:
•
Serial - choose a COM port
•
USB - choose a COM port
•
Network - choose a receiver and define network settings
5. Click the OK button to save the new connection.
Detailed instructions for using NovAtel Connect are available from within the utility Help.
Default baud rate of 115200 is preferred if a higher is not available. No handshaking.
6
to access and download the latest version of NovAtel Connect PC Utilities.
Advertisement
Table of Contents
