When A Message Appears - Ricoh C23535 Operating Instructions Manual

When a Message Appears

This section explains the machine's main messages. If other messages appear,
follow their instructions.
Message
Put original
back, check it
and press the
Start key.
Cannot detect
original size.
Place original
again, then press
the Start key.
Functional prob-
lems with facsim-
ile. Data will be
initialized.
Remove the paper
from Internal
Tray 1.
Original is being
scanned by anoth-
er function.
Switch to the fol-
lowing function,
then press the
Stop key to cancel
scanning or press
the Start key to
continue.
Cause
Original jammed during
Memory Transmission.
The machine failed to de-
tect the size of the origi-
nal.
There is a problem with
the fax.
The Internal Tray 1 is full. Remove the paper. If the other tray is
The machine is scanning
an original under another
function.
When a Message Appears
Solution
Place originals that have not been
scanned on the exposure glass or ADF
again.
Place original again, and then press the
{Start} key.
Record the code number shown in the
display and contact your service repre-
sentative. Other functions can be used.
also full, the tray name shown in the
display changes. Remove paper from
the tray indicated in the display.
Before sending a file by fax, cancel the
job in progress. To do this, press [Exit],
and then press the {Copy} or {Document
Server} key to display the suspended
function. Then, on the copier or docu-
ment server screen, press the
{Clear/Stop} key to display the "
Stop key has been pressed.
Are you sure you want to
" or "
stop copying?
/ Stop key was pressed. Are
you sure you want to stop
" prompt, and then press
scanning?
[Stop].
3
The
The Clear
33