Ricoh C23535 Operating Instructions Manual page 65

❖ Large Capacity Tray
Paper type and Metric version
weight
Standard A4K
2
60-105g/m
(16-28lb.)
Note
❒ When you load paper in Paper Tray 1, 2, or 3 (LCT) or on the optional Lower
Paper Trays, load it print side up.
❒ Load paper into the bypass tray with the print side down.
❒ When using the bypass tray, it is recommended to set the paper orientation to
L.
❒ You must manually specify the size of custom size paper when loading it on
the bypass tray.
❒ When loading paper in Paper Tray 3 (LCT), make sure the top of the stack is
no higher than the limit mark. The number of sheets you can load depends on
the thickness and condition of the paper.
❒ If you want to change the size of paper that can be loaded in Paper Tray 3
(LCT), contact your service representative.
❒ If multiple-sheet jams occur, load the paper sheet by sheet.
❒ Do not use paper designed for inkjet printers, as these may stick to the fusing
unit and cause a misfeed.
❒ We recommend you load OHP transparencies, and adhesive label sheets one
at a time.
❒ When loading OHP transparencies, check the front and back of the sheets,
and place them correctly, or a misfeed might occur. Set the paper orientation
to L.
❒ When loading OHP transparencies, set [Special Paper] in Bypass Tray Paper to
[OHP].
❒ When using OHP transparencies, fan them for each use. If you store the sheets
in the tray, they may adhere and may cause feeding problems.
❒ When copying onto OHP transparencies, remove copied sheets one by one.
❒ When loading thick paper (106-253g/m
make sure the top of the stack is no higher than the limit mark. The number
of sheets you can load depends on the thickness and condition of the paper.
❒ To load thick paper (106-253g/m
Tray Paper to [Thick Paper 1], [Thick Paper 2], or [Thick Paper 3].
❒ To print onto adhesive label sheets, set [Special Paper] in Bypass Tray Paper to
[Thick Paper].
❒ When copying onto letterhead paper, the paper placing orientation is differ-
ent depending on which function you are using. See "Orientation-Fixed Pa-
per or Two-Sided Paper", Troubleshooting.
Inch version
" × 11"K
1
8 /
2
2
, 28.5-67lb.), or adhesive label sheets,
2
, 28.5-67lb.), set [Special Paper] in Bypass
Copy Paper
Paper
capacity
2000
sheets
3
51