Ricoh C23535 Operating Instructions Manual page 98

Connecting the Machine
Menu
File Transfer
File Transfer
1
File Transfer
File Transfer
File Transfer
Note
❒ For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒ When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3 / IMAP4 Settings.
❒ When SMTP Authentication is set to [On], also make setting for Administra-
tor's E-mail Address.
❒ E-mail Communication Port and Fax E-mail Account must be specified in or-
der to use the reception function.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.59 "Interface Settings"
p.69 "File Transfer"
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Internet Fax with an IEEE 1394
connection.
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/IEEE 1394 IPv4 Address
Interface Settings/IEEE 1394 DDNS Configuration
Interface Settings/IEEE 1394 Host Name
Interface Settings/IEEE 1394 Domain Name
Interface Settings/IEEE 1394 WINS Configuration
Interface Settings/IEEE 1394 IPv4 over 1394
18
User Tool
E-mail Reception Interval
Max. Reception E-mail Size
E-mail Storage in Server
Program / Change /
Delete E-mail Message
Fax E-mail Account
User Tool
Setting Requirements
As required
As required
As required
As required
Necessary
Setting Requirements
Necessary
As required
As required
As required
As required
Necessary