Ricoh C23535 Operating Instructions Manual page 816

Placing Originals
Custom sizes
When placing custom size originals in the ADF, specify the size of the originals.
1 Important
❒ Paper that has a vertical length of 128–297 mm (5.1"-11.6") and a horizontal
length of 128–432 mm (5.1"-17") can be placed with this function.
A
Press [Special Original].
B
Press [Original Size].
C
Press [Custom Size].
D
Enter the horizontal size of the original with the number keys, and then
press the {q} key.
E
Enter the vertical size of the original with the number keys, and then press
the {q} key.
F
Press [OK].
G
Place the originals, and then press the {Start} key.
Note
❒ If you make a mistake in step
and then enter the value again.
24
, press [Clear] or the {Clear/Stop} key,
D E
or