Installing The Memory Card (Optional) - Kyocera FS-1370DN Service Manual

1-2-4

Installing the memory card (optional)

Procedure
1. Turn off printer power switch.
Caution: Do not insert or remove memory
card while printer power is on.
Doing so may cause damage to the printer
and the memory card.
2. Open the rear cover.
3. Remove two screws and then remove the
optional interface slot cover.
4. Insert the memory card into the memory
card slot. Push it in all the way.
5. Secure the optional interface slot cover by
using two screws.
6. Close the rear cover.
7. Format the memory card before use.
Optional interface
slot cover
Figure 1-2-6
Memory card slot
Figure 1-2-7
2L0
Rear cover
Screw
Screw
Memory card
Screw
Screw
Optional interface
slot cover
1-2-5