[Expert Adjustment]; [Ae Level Adjustment] - Konica Minolta bizhub C554 User Manual

[Expert Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment]
Specify this setting if the color tone of print image, staple, hole-punch, and folding positions are changed.
You can adjust various settings such as correction of printed image, adjustment of staple, hole-punch, and
folding positions.
Settings

[AE Level Adjustment]

[Printer Adjustment]
[Finisher Adjustment]
[Density Adjustment]
[Image Stabilization]
[Paper Separation Adjust-
ment]
[Color Registration Adjust]
[Gradation Adjustment]
[Scanner Area]
[ADF Adjustment]
[Line Detection]
[Trail Edge Adjust]
[User Paper Settings]
[Erase Adjustment]
[PS Designer Settings]
[AE Level Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [AE Level Adjustment]
Adjust the AE (Auto Exposure) level.
Tap [Higher] or [Lower] to adjust the automatic exposure to one of the five levels. The larger the number, the
darker the background.
[2] is specified by default.
bizhub C554/C454/C364/C284/C224
Description
Adjust the AE (Auto Exposure) level.
For details, refer to page 17-13.
Adjust the print start position and defective print images.
For details, refer to page 17-14.
Adjust the staple, punch or fold position.
For details, refer to page 17-17.
Adjust the density of images that are printed on thick paper, OHP transpar-
encies, or envelops for each paper type and print color.
For details, refer to page 17-27.
Correct the misalignment or tilt of scanning area caused by changes in the
temperature or humidity in the machine to ensure high quality printing.
For details, refer to page 17-27.
Adjust the paper separation position on each side of paper for 2-sided
printing.
For details, refer to page 17-27.
Adjust the print position with respect to each color if color shifts are detect-
ed in the print result.
For details, refer to page 17-28.
Adjust gradation when reproduction quality of the printed image is degrad-
ed.
For details, refer to page 17-29.
Adjust the scan range of the scanner. For details, contact your service rep-
resentative.
Make adjustments for scanning images in the ADF. For details, contact
your service representative.
Set this option for the dirt detection level for the Slit Scan Glass and clean-
ing of the Slit Scan Glass.
For details, refer to page 17-30.
Correct the color misalignment if the trailing edge of the printed image is
out of alignment.
For details, refer to page 17-30.
Register special paper with [User Paper 1] through [User Paper 6]. Settings
to configure include Basic Weight and Media Adjustment. For details on
displaying this item, contact your service representative.
Specify the operation and erase method when erasing the area outside the
original by setting [Non-Image Area Erase].
For details, refer to page 17-31.
Specify whether to reproduce the colors in the original strictly as they are
when printing it using a PS driver from your computer.
For details, refer to page 17-31.
17
17-13