Scanning An Original Thinner Than Normal Paper ([Thin Paper Original]); Scanning A Folded Original ([Z-Folded Original]); Scanning While Removing Dust In The Slit Glass ([Despeckle]) - Konica Minolta bizhub C554 User Manual

7

Scanning an original thinner than normal paper ([Thin Paper Original])

Reduce the original feed speed of the ADF to prevent thin paper from getting caught.
For details, refer to page 15-19.

Scanning a folded original ([Z-Folded Original])

The size of the original - even folded originals - can be detected accurately.
If a folded original is loaded into the ADF, the size of the original may not be detected properly. To scan a
folded original through the ADF, use [Z-Folded Original].
For details, refer to page 15-19.
NOTICE
Unfold folded originals before loading them into the ADF. If a folded original is not unfolded before scanning,
a paper jam or an erroneous size detection may occur.

Scanning while removing dust in the slit glass ([Despeckle])

When scanning an original that has been placed into the ADF, scanning of the original and removal of dust
from the Slit Scan Glass are performed alternately so that the original is always scanned on clean Slit Scan
Glass.
It takes longer to finish scanning, compared to the normal operation.
For details, refer to page 15-19.
bizhub C554/C454/C364/C284/C224 7-5