17
[1st Tri-Fold Position Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [1st Tri-Fold Position Adjustment]
If the tri-fold positions are not located evenly, use this option to adjust the first fold position.
Copy after configuration, then repeat adjustments as required.
Settings
[Paper Size]
[Adjust Value]
Tips
-
This item is available when the Finisher FS-534 and Saddle Stitcher SD-511 are installed.
-
This item is available when the Finisher FS-535 and Saddle Stitcher SD-512 are installed (only for
bizhub C554).
-
Make adjustment while checking paper folded at a displaced position.
-
The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.
[2nd Tri-Fold Position Adjustment]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [2nd Tri-Fold Position Adjustment]
If the tri-fold positions are not located evenly, use this option to adjust the second fold position.
Copy after configuration, then repeat adjustments as required.
Settings
[Paper Size]
[Adjust Value]
17-20
Description
Select the size of paper that is used to adjust the fold position.
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-]
and [+].
•
[-]: Move the fold position to the left.
•
[+]: Move the fold position to the right.
[0.0 mm] is specified by default.
Description
Select the size of paper that is used to adjust the fold position.
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-]
and [+].
•
[-]: Move the fold position to the left.
•
[+]: Move the fold position to the right.
[0.0 mm] is specified by default.
bizhub C554/C454/C364/C284/C224