Konica Minolta bizhub C554 User Manual page 14

1
% For details on copy settings, refer to the respective columns of the following table.
Purpose
To copy by specifying the color, image quality, density, etc.
To print on both sides of paper or combine pages, and save the number of
sheets
To change the paper size or type of the paper to be copied
To staple printed copies or create a booklet
To copy various types of originals, such as card and magazine
To adjust the layout such as specifying the zoom ratio and creating a poster
To insert a cover sheet or blank sheet into copied documents
To add the date, page number, stamp, etc. on copied documents
To remove an unnecessary portion of the original
To prohibit unauthorized copying
To save originals on the hard disk (user box) of this machine
4
If necessary, specify the number of copies using the Keypad.
% To use the Keypad, slide the Control Panel to the left.
% If the [10 Keypad] is assigned to the Register key, pressing the Register key enables you to display
the Keypad on the Touch Panel to enter data.
% To retype the number of copies, press C (Clear).
5
Press the Start key.
% If desired, tap [Check Setting] before starting a copy, and check the settings.
The original is scanned and copy begins.
% If you press the Stop key while scanning or printing an original, processing is stopped, and a list of
inactive jobs is displayed. To perform processing again, delete the inactive jobs from the list.
% If [Ready to accept another job.] appears while printing a job, you can scan the next original.
Related setting
- You can change the default copy settings to suit your environment. For details, refer to page 16-13.
1-4
Making a copy (Basic operation flow)
bizhub C554/C454/C364/C284/C224
1.1
Reference
page 3-3
page 4-3
page 5-3
page 6-3
page 8-3
page 9-3
page 10-3
page 11-3
page 12-3
page 13-3
page 14-3