[Punch Unit Size Detect Sensor]; [Post Inserter Tray Size Adjustment]; [Paper Alignment Plate Settings] - Konica Minolta bizhub C554 User Manual

17
Tips
- This adjustment is possible when the Finisher FS-535 and Z Folding Unit ZU-606 are installed in
bizhub C554.
- Make adjustment while checking paper folded at a displaced position.
- The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.
- The distance between the left end of the paper and the second Z-fold position must be 1/16 inch (2
mm) or more.

[Punch Unit Size Detect Sensor]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Punch Unit Size Detect Sensor]
Use this option to adjust the sensor of the Punch function to detect the edge of the paper.
Press Start to start adjustment.
Tips
- This adjustment is possible when the Finisher FS-535 and Z Folding Unit ZU-606 are installed in
bizhub C554.

[Post Inserter Tray Size Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Post Inserter Tray Size Adjustment]
If the size of the paper loaded into the Post Inserter is not detected correctly, use this option to adjust it so
that it is detected correctly.
Select a paper tray and paper size to be adjusted, and load paper. Press Start to start adjustment.
Tips
- This adjustment is possible when the Finisher FS-535 and Post Inserter are installed in bizhub C554.

[Paper Alignment Plate Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Paper Alignment Plate Settings]
If paper is not discharged with the edges aligned, use this option to adjust the effective width of the paper
alignment plate for making discharged paper stored neatly.
Settings
[ Alignment Plate Position
(Back)] / [Alignment Plate
Position (Front)]
[Adjust Value]
Tips
- This adjustment is possible when the Finisher FS-533 is installed.
17-26
Description
Select the paper alignment plate to adjust the position.
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-]
and [+].
[0.0 mm] is specified by default.
bizhub C554/C454/C364/C284/C224