8
Copying a catalog ([Booklet Original])
Scan a catalog with the staples removed as a 2-sided original, make a 2-sided copy, and staple the center
of the paper in the same manner as the original catalog.
0
To configure [Booklet Original]:
The Finisher FS-534 and Saddle Stitcher SD-511 are required.
The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for bizhub C554).
1
Load the original.
NOTICE
Load a catalog with the staples removed.
% To use the Original Glass, position the pages in order, starting with the side that includes the first
page, then the side that includes the second page, then the side that includes the third page.
% To use the ADF, load the pages with the side that includes the first page on top.
8-6
bizhub C554/C454/C364/C284/C224