Expert Adjustment - Konica Minolta bizhub C652 User Manual

7.1 System Settings
Factory default
Changing the "From" Ad-
dress
Change Registered Over-
lay
Biometric/IC card Informa-
tion Registration
Restrict Broadcasting
7.1.7

Expert Adjustment

Make adjustments so that output quality is increased.
%
Settings
AE Level Adjustment
Printer Adjustment
bizhub C652/C652DS/C552/C552DS/C452
Downloaded From ManualsPrinter.com Manuals
Restrict
Allow
Restrict
OFF
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment].
Configure the initial value for AE (auto exposure). The higher the setting,
the more that the original background is emphasized.
Adjust the starting print position and defective print images caused by pa-
per type features.
Leading Edge Adjustment
Centering
Leading Edge Adjustment (Du-
plex Side 2)
Centering (Duplex 2nd Side)
Erase Leading Edge
Vertical Adjustment
Media Adjustment
d
Reference
The starting print position is factory-adjusted. Normally, you
are not required to change the set values.
p. 7-13
p. 7-13
p. 7-13
p. 7-13
Adjust leading edge erase width.
For details on displaying this item,
contact your service representative.
Adjust the feed direction zoom ratio of
paper types.
For details on displaying this item,
contact your service representative.
p. 7-14
7
7-9