[Original Settings] - Konica Minolta bizhub C554 User Manual

[Original Settings]

To display: [Copy] - [Application] - [No. of Originals] - [Original Settings]
Set the options to scan originals correctly based on their properties.
Settings
[Original Setting]
[Despeckle]
[Blank Page Removal]
[Binding Position]
[Original Size]
[Original Direction]
bizhub C554/C454/C364/C284/C224
Description
Set the options to scan originals correctly based on their properties.
• [Mixed Original]: Even for an original containing pages of different sizes,
by using the ADF, you can scan data while the size of each page is de-
tected. For details, refer to page 15-20.
• [Thin Paper Original]: Reduce the original feed speed of the ADF to pre-
vent the original from getting caught. For details, refer to page 15-20.
• [Z-Folded Original]: The size of the original - even folded originals - can
be detected accurately. For details, refer to page 15-21.
• [Booklet Original]: Scan a catalog with the staples removed as a 2-sid-
ed original, make a 2-sided copy, and staple the center of the paper in
the same manner as the original catalog. For details, refer to
page 15-21.
Scan originals using the ADF while removing dust on the Slit Scan Glass.
For details, refer to page 15-22.
Blank pages contained in the original loaded into the ADF are skipped
when the original is scanned.
For details, refer to page 15-22.
When scanning a 2-sided original, select the original binding position to
prevent the binding positions be reversed between the front and rear faces.
For details, refer to page 15-23.
If the size of the original is not detected correctly, select a key indicating
the size of the original to be scanned.
For details, refer to page 15-23.
Specify the orientation of the loaded original.
For details, refer to page 15-24.
15
15-19