,QWURGXFWLRQ WR 5HSRUWV
5XQQLQJ DQ $XWRVHTXHQFH
Running an Autosequence
Many autosequences are run automatically at programmed times. Some
autosequences, however, can be run manually. To run an autosequence,
start the Autosequences and Reports module. (For information on starting
the Autosequences and Reports module, see
page
1-19.)
When you log in, the module opens to the Autosequences folder. Any
autosequences you are privileged to use appear as buttons on the folder.
(Autosequence privilege levels are assigned to employee classes in
Employee Classes | Privileges | Autosequences. The privilege level
required to run a specific autosequence is assigned in Autosequences |
Privilege.)
To run an autosequence, click the appropriate button. A window opens
with a message saying the autosequence has started. When the
autosequence is finished, the message 'DONE' appears in the window.
Some autosequences may be programmed to prompt the user for
information, such as a date range. When this happens, a window opens
prompting for information.
5HSRUWV