Home Security - GE Simon XT User Manual

Home security

The Simon XT allows you to control which sensors are active at any given time.
Table 4 below describes the arming levels that you can set from the control panel.
Table 4: Arming levels
Level Function
0 Subdisarm
1 Disarm
2 Arm door and window
sensors (exterior)
3 Arm motion sensors (interior)
4 Arm doors/windows and
motion sensors
Arming/disarming
Arming a sensor makes it active and allows the panel to generate an alarm when a
door or window is opened or when an unauthorized person enters a specific area.
Disarming makes the sensor inactive in the system. The current arming level is shown
on the panel display and changes in arming level are announced on the speaker.
To subdisarm (level 0):
1. Enter the master code while the system is disarmed.
The panel displays and speaks Subdisarmed, the Disarm button blinks, and the
panel beeps once.
2. When you finish accessing the temporarily unprotected areas, press Disarm to
return to the disarmed level.
To disarm (level 1):
1. Press Disarm.
2. Enter your code when the display shows Enter Code.
The panel displays and speaks Disarmed, the Disarm button lights up, and the
panel beeps once.
6
Description
If your system includes 24-hour protection sensors, you must
subdisarm the panel before accessing these areas to avoid
causing an alarm. Environmental sensors (such as smoke or
carbon monoxide detectors) stay active at all times.
In this level, only 24-hour sensors are active. Environmental
sensors (such as smoke or carbon monoxide detectors) stay
active at all times.
This level arms the door and window sensors, while leaving the
interior motion sensors disarmed.
This level arms the interior motion sensors, while leaving the
exterior door and window sensors disarmed.
This level arms all sensors.
Simon XT User Manual