Installing Or Removing The Lenovo Thinkserver Raid 110I Upgrade Key - Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual

1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 61.
3. Remove the server cover. See "Removing the server cover" on page 61.
4. Locate the AnyRAID adapter. See "Server components" on page 25.
5. Remove any parts and disconnect any cables that might impede your operation.
6. Press the two release tabs
adapter.
Note: If necessary, remove the AnyRAID adapter first for easier operation. Then, reinstall the AnyRAID
adapter. See "Replacing the AnyRAID adapter" on page 93.
Figure 68. Removing the AnyRAID flash module
7. Reinstall any parts and reconnect any cables that you have removed.
8. If you are instructed to return the old AnyRAID flash module, follow all packaging instructions and use
any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to "Completing the parts replacement" on page 165.

Installing or removing the Lenovo ThinkServer RAID 110i upgrade key

The Lenovo ThinkServer RAID 110i upgrade key (hereinafter referred to as RAID 110i key) activates RAID 5
for the onboard SATA software RAID. As a result, the capability of the system board is expanded. You can
purchase a RAID 110i key from Lenovo and install it to the RAID upgrade key connector on the system board.
For a list of ThinkServer options, go to:
http://lenovoquickpick.com/usa/home/thinkserver/rack-and-tower-server
Installing the RAID 110i key
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 59.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
1 and lift the AnyRAID flash module straight up and out of the AnyRAID
.
Chapter 6 Replacing hardware
97