Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 144

5. Note the orientation of the ThinkServer RAID Super Capacitor Module. Then, gently press the tab
on the cooling shroud as shown and install the ThinkServer RAID Super Capacitor Module onto the
cooling shroud at the same time.
Figure 103. Installing the ThinkServer RAID Super Capacitor Module onto the cooling shroud
6. Connect the ThinkServer RAID Super Capacitor Module to a RAID card.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 165.
Removing the ThinkServer RAID Super Capacitor Module
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 59.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the ThinkServer RAID Super Capacitor Module and follow
those instructions in addition to the instructions in this topic.
To remove the ThinkServer RAID Super Capacitor Module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 61.
3. Remove the server cover. See "Removing the server cover" on page 61.
4. Disconnect the cable of the ThinkServer RAID Super Capacitor Module from the RAID card.
130
ThinkServer RD450 User Guide and Hardware Maintenance Manual