Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 79

5. Insert your fingers into the holes
Figure 31. Removing the cooling shroud
6. To reinstall the cooling shroud, do the following:
a. Ensure that:
• All components have been reassembled correctly.
• No tools or loose screws are left inside your server.
• All cables inside the server have been properly routed and they will not interfere with installing
the cooling shroud.
b. Note the orientation of the cooling shroud. Align the tabs on both sides of the cooling shroud with
the corresponding holes or gaps in both sides of the chassis.
c. Lower the cooling shroud into the chassis until it snaps into position.
Note: If necessary, gently press the cooling shroud on both sides so that the tabs on the cooling shroud
completely engage with both sides of the chassis.
Figure 32. Installing the cooling shroud
1 in the cooling shroud and lift it out of the server.
1
.
Chapter 6 Replacing hardware
65