Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 108

5. Loosen the two screws and grasp the AnyRAID adapter by its edges and carefully pull it out.
Note: The AnyRAID adapter might fit tightly into the slots. If necessary, alternate moving each side of
the AnyRAID adapter a small and equal amount until it is removed from the slots.
Figure 64. Removing the AnyRAID adapter
6. Touch the static-protective package that contains the new AnyRAID adapter to any unpainted surface
on the outside of the server. Then, take the new AnyRAID adapter out of the package.
Note: Carefully handle the AnyRAID adapter by its edges.
7. Position the new AnyRAID adapter near the backplane. Then, carefully press the AnyRAID adapter
straight into the AnyRAID adapter slots until it is securely seated.
Figure 65. Installing the AnyRAID adapter
94
ThinkServer RD450 User Guide and Hardware Maintenance Manual