Completing The Parts Replacement; Reinstalling The Server Cover And Reconnecting Cables - Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual

• To complete the replacement, go to "Completing the parts replacement" on page 165.

Completing the parts replacement

This topic provides instructions to help you complete the parts replacement and turn on your server.
To complete the parts replacement, you must properly route the cables inside the server, reinstall the server
cover, reconnect all the external cables and, for some devices, update the firmware and run the Setup Utility
program to do further setup.

Reinstalling the server cover and reconnecting cables

Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 59.
Attention: For proper cooling and airflow, reinstall the server cover before turning on the server. Operating
the server with the server cover removed might damage server components.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your server might look different from the illustrations in this topic.
To reinstall the server cover and reconnect cables to your server, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are
left inside your server.
.
Chapter 6 Replacing hardware
165