Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 100

Note: Carefully handle the PCIe card by its edges.
7. Adjust the card-retaining bracket if necessary. See "Adjusting the card-retaining bracket" on page 83.
8. Position the PCIe card near the PCIe slot. Then, carefully press the PCIe card straight into the slot until it
is securely seated. Ensure that the PCIe card bracket is secured by the riser card bracket.
Figure 53. Installing the PCIe card
9. Pivot the card latch to the closed position to secure the PCIe card in position.
Figure 54. Pivoting the card latch to the closed position
10. Depending on the type of the PCIe card, connect any required cables if necessary. Refer to the
documentation that comes with the PCIe card for specific information.
11. Reinstall the riser card assembly. See "Replacing the riser card" on page 77.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
86
ThinkServer RD450 User Guide and Hardware Maintenance Manual