Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 34

Front view of server models with an internal tape drive
1
Figure 6. Front view of server models with an internal tape drive
1
Rack handle (left)
3
Pull-out information card
5
Slim optical drive (available on some models)
7
2.5-inch-drive bays (0–7)
1 6 Rack handles
If your server is installed in a rack cabinet, you can use the rack handles to help you slide the server out of
the rack cabinet. You also can use the rack handles and screws to secure the server in the rack cabinet so
that the server cannot slide out, especially in vibration-prone areas. For more information, refer to the Rack
Installation Instructions that comes with your server.
2 Front panel
For information about the controls, connectors, and status LEDs on the front panel, see "Front panel"
on page 21.
3 Pull-out information card
The machine type, model, and serial number label of the server is attached on the pull-out information card.
See "Machine type, model, and serial number label" on page 15.
4 Internal tape drive
Some server models come with an internal tape drive. The internal tape drive enables you to store data on
tapes.
5 Slim optical drive
Some server models come with a slim SATA optical drive (DVD-RW or DVD-ROM).
7
2.5-inch-drive bays (0–7)
The EMI integrity and cooling of the server are protected by having all drive bays covered or occupied.
The number of the installed drives in your server varies by model. The vacant drive bays are occupied
by dummy trays.
When you install drives, follow the order of the drive bay numbers.
20
ThinkServer RD450 User Guide and Hardware Maintenance Manual
0 4
5
1
2 6
3 7
5
2
Front panel
4
Internal tape drive (available on some models)
6
Rack handle (right)