Rear View Of The Server - Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual

4 System ID button with ID LED
When you press the ID button on the front panel, the ID LEDs on both the front and rear of the server are
lit to help you locate the server among other servers. You also can turn on the ID LEDs using a remote
management program for server presence detection.
Status
On
Off
5 DisplayPort connector
Used to attach a high-performance monitor, a direct-drive monitor, or other devices that use a DisplayPort
connector.
6 Front USB 2.0 connectors (2)
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you
have more than six USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.

Rear view of the server

This topic provides information to help you locate the connectors and components on the rear of your server.
Figure 8. Rear view of the server
1
Power supply 1
3
PCIe slot 6
5
PCIe slot 4 (on riser card assembly 2)
7
PCIe slot 1 (on riser card assembly 1)
9
System ID LED
11
Ethernet connector 2 (RJ-45)
13
Serial connector
15
VGA connector
Color
Blue The server is identified.
None The ID LED is not in use or the server is not identified.
Description
2
Power supply 2 (available on some models)
4
PCIe slot 3 (on riser card assembly 2)
6
PCIe slot 5 (on riser card assembly 2)
8
PCIe slot 2 (on riser card assembly 1)
10
USB 3.0 connectors (2)
12
Ethernet connector 1 (RJ-45)
14
Ethernet connector for system management (RJ-45)
.
Chapter 3 Product overview
23