Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 110

• Depending on the specific type, your AnyRAID adapter and the AnyRAID flash module might look different
from the illustration in this topic.
To install the AnyRAID flash module, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See "Removing or extending the server from the rack cabinet" on page 61.
3. Remove the server cover. See "Removing the server cover" on page 61.
4. Locate the AnyRAID adapter. See "Server components" on page 25.
5. Remove any parts and disconnect any cables that might impede your operation.
6. Position the AnyRAID flash module above the AnyRAID adapter and align the two holes in the AnyRAID
flash module with the two pins on the AnyRAID adapter. Then, lower the AnyRAID flash module straight
down until it is securely seated.
Note: If necessary, remove the AnyRAID adapter first for easier operation. Then, reinstall the AnyRAID
adapter. See "Replacing the AnyRAID adapter" on page 93.
Figure 67. Installing the AnyRAID flash module
7. Reinstall any parts and reconnect any cables that you have removed.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 165.
Removing the AnyRAID flash module
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 59.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the specific type, your AnyRAID adapter and the AnyRAID flash module might look
different from the illustration in this topic.
To remove the AnyRAID flash module, do the following:
96
ThinkServer RD450 User Guide and Hardware Maintenance Manual