Lenovo ThinkServer RD450 User Manual And Hardware Maintenance Manual page 149

2. Press the circled area
Figure 110. Opening the handle of the dummy tray
3. Pull the handle and carefully slide the dummy tray out of the front of the chassis.
Figure 111. Removing the dummy tray
4. Touch the static-protective package that contains the 2.5-inch solid-state drive to any unpainted surface
on the outside of the server. Then, take the solid-state drive out of the package.
Note: Do not touch the circuit board on the solid-state drive.
1 to open the handle of the dummy tray.
1
.
Chapter 6 Replacing hardware
135