Table of Contents
Advertisement
Chapter 2 Preparations
1.12.2 Replacement / Removal
To remove processor (CPU), reverse the installation procedure.
After removal, perform the following steps.
1.
Install the dust-proof cover to processor (CPU) socket.
2.
Secure the dummy cover with four screws.
3.
Remove the additional fan unit.
4.
Install the fan unit cover.
5.
Run BIOS Setup Utility (SETUP) to confirm the following settings. Refer to Chapter 2 (1. System
BIOS) in "Maintenance Guide".
Advanced → Processor Configuration → Processor Information
60
Important
• Do not remove any processor unless it is failed.
• To remove the heat sink from the processor, first turn the heat sink to the left and
right lightly to make sure that the heat sink can be apart from the processor.
Removing the heat sink with it adhering to the processor may cause the
processor and/or CPU socket to be defected.
• Failing to install dust-proof cover and dummy cover to vacant slot after removal
of processor may cause malfunction of the server due to insufficient cooling
effect.
[CPU ID]
[L2 Cache RAM]
[L3 Cache RAM]
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
