Table of Contents
Advertisement
Chapter 2 Preparations
Installing outer rails
Fit the square-shaped protrusions of the outer
rail to the square holes of a 19-inch rack. Make
sure that it makes a clicking sound indicating
that it is locked.
The image on the right shows the front right
side (front) of the rack. Install to the rear right
side and front and rear left sides following the
same procedure.
Make sure that the rail is installed at the same
height as the other slide rail assemblies
already installed.
Installing the Server
116
Important
Confirm that the rail assemblies are securely locked so that they will not fall
off.
Tips
Although the rail assembly may be somewhat unsteady, it is not defective.
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
• Do not drop.
• Do not leave the server being pulled out.
• Do not install with the cover removed.
• Do not get your fingers caught.
Express5800/R120d-2M User's Guide
CAUTION
2. Installation and Connection
Advertisement
Table of Contents
