Specifications - NEC N8100-1793F User Manual

Chapter 4 Appendix
1.

Specifications

Product name
N code
CPU CPU
Clock speed
Standard/Maximum
3rd cache
Number of cores (C) /
Number of threads (T) (1
CPU)
Chipset
Memory
Standard/Maximum
Memory module
Maximum clock speed
Error check, correction
Memory Sparing
Memory Mirroring
Standard
Auxiliary Drive bay
storage
Maximum
device
Hot swap
Interface level /
RAID System
Optical disk drive
FDD
Device bay
Expansion
slots
Supported slot
Graphics Chip / VideoRAM
Graphic display /
resolution
Interface
Power supply
Redundant power supply
Redundant fan
External dimensions
(width × depth × height)
Weight (Standard/ Max.)
Power consumption High-load
(100V at maximum state
configuration)
40°C
environment
Environmental Operating
requirements
Temperature/Humidity
Storage
(No condensation either
when operating or when
stored)
138
N8101- N8101- N8101-
545F 546F 547F
Intel® Xeon® processor
E5-2609 E5-2630L E5-2640
2.40GHz 2.00GHz 2.50GHz
1/2
10M 15M
4C/4T 6C/12T
Intel® C602-J chipset
Not pre-installed / Unbuffered DIMM: 64GB (16x 4GB), Registered DIMM: 384GB (24x 16GB), Load
Reduced DIMM: 768GB (24x 32GB)
DDR3L-1333 Unbuffered DIMM (4GB), DDR3L-1600 Registered DIMM (2/4/8/16GB), DDR3L-1333
Load Reduced DIMM (32GB)
1066MHz 1333MHz
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Supported
Supported
–
HDD: SATA 16TB (16x1TB), SAS 14.4TB (16x900GB), SSD: SATA 1.6TB (16x100GB),
SAS 6.4TB (16x 400GB) (with optional HDD cage installed)
Supported
SATA 6Gb/s: RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s: RAID 0/1/5/6/10/50/60 (Option)
Internal / external drive (option)
Option: Flash FDD (1.44MB) *2
3.5-inch bay x 1
1 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 312 mm in length)
2 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 220 mm in length)
(One slot is required in 2-CPU configuration.)
2 x PCI EXPRESS 3.0 (x4 lane, x8 socket) (Low profile, 220 mm in length)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to RAID Controller)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Management controller chip / 32 MB
16,770,000 colors: 640 x 480, 800 x 600, 1,024 x 768, 1,280 x1,024
9 x USB 2.0 (2 x Front, 4 x Rear, x 3 Internal), 2 x Analog RGB (Mini D-Sub15 pin, 1x Front, 1x
Rear),
1 x Serial port (RS-232C compliant / D-Sub9 pin, Serial port A, 1 x Rear, optional port can be used
(up to two ports in total),
2 x 1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2 x Rear),
1 x Management LAN connector (100BASE-T / 10BASE-T supported, RJ45, 1 x Rear)
Not preinstalled /
450W or 800W or 1200W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available)
(Maximum: 2)
100/200VAC±10%, 50/60Hz
Supported (option, hot-plug available)
Supported (option, hot-plug unavailable)
When power supply unit N8181-86 (450W) or N8181-87 (800W) is selected:
448.0 mm x 735.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 869.9 mm x 87.2 mm (Front bezel, inner rails, projections are included)
When power supply unit N8181-88 (1000W) is selected:
448.0 mm x 770.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 869.9 mm x 87.2 mm (Front bezel, inner rails, projections are included)
22kg / 33kg (Rails included)
850VA / 810VA / 880VA /
840W 800W 870W
850VA / 810VA / 880VA /
840W 800W 870W
10 to 40C°
20 to 80%
–10 to 55C°
20 to 80%
Express5800/R120d-2M User's Guide
Express5800/R120d-2M
N8100-1793F
N8101- N8101- N8101-
548F 549F 550F
E5-2643 E5-2650 E5-2650L
3.30GHz 2.00GHz 1.80GHz
10M 20M
4C/8T 8C/16T
1600MHz
950VA / 880VA / 830VA /
940W 870W 820W
950VA / 880VA / 830VA /
940W 870W 820W
10 to 35C° 10 to 40C°
20 to 80% 20 to 80%
1. Specifications
N8101- N8101-
551F 552F
E5-2670 E5-2690
2.60GHz 2.90GHz
920VA / 960VA /
910W 950W
920VA / 960VA /
910W 950W
10 to 35C°
20 to 80%