Removal - NEC N8100-1793F User Manual

Chapter 2 Preparations
4. Connect the cable of additional battery
to RAID Controller.
5. Remove the two screws from server
chassis, and remove the RAID
Controller bracket.
6. Remove the two screws from RAID
Controller, and remove PCI bracket.
7. Install the RAID Controller bracket to
RAID Controller using two screws you
have removed in Step 6.
8. Install RAID Controller to the RAID
Controller connector on motherboard,
using two screws you have removed in
Step 7.
9. Connect Mini SAS cable to RAID
Controller.
1.14.3

Removal

For removing the battery for the RAID Controller, reverse the installation procedure.
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices
77