NEC N8100-1793F User Manual page 71

Chapter 2 Preparations
(2) Memory Lock Step Feature (x8 SDDC)
In Memory Lock Step feature, the DIMMs in two groups corresponding to two memory channels (channels 0
and 1, or channels 2 and 3) is multiplexed and operated in parallel to enable x8 SDDC (x8 Single Device Data
Correction). With this feature, a single device can detect and correct one to eight-bit error.
LockStep Set
#9
LockStep Set
#5
LockStep Set
#1
LockStep Set
#10
LockStep Set
#6
LockStep Set
#2
Note
• Memory LockStep feature uses channels 0 and 1 or channels 2 and 3.
• To use Memory LockStep feature, install N8102-472/473/474/475 additional memory
board (two DIMMs of same model).
• DIMMs to be installed in Lockstep set must have same capacity.
Memory controller
Memory controller
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices
LockStep Set
#11
LockStep Set
#7
LockStep Set
#3
LockStep Set
#12
LockStep Set
#8
LockStep Set
#4
71