Table of Contents
Advertisement
Chapter 2 Preparations
1.19
Optical Disk Drive
This section describes the procedure for installing the optional optical disk drive.
1.19.1 Installation
Install an optical disk drive in the following procedure.
1.
Refer to Steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Lift the lock of optical disk
drive, and pull the tray
toward you.
3.
Remove a single screw
from the tray you have
removed in Step 1, and
remove the bracket.
4.
Remove the dummy cover.
5.
Install the optical disk drive to the tray.
98
Important
Do not install any unsupported optical disk drive.
Note
Keep the removed screws and dummy cover for future use.
Express5800/R120d-2M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
