Registration Roll Assembly
Removal
1.
Remove the Registration Chute.
2.
Remove the E ring from the rear of the Registration Roll Shaft.
3.
Slide the Shaft to the rear to free the front of the Shaft from the front bearing.
4.
Remove the Registration Roll Assembly.
Replacement
1.
Make sure both the front and rear bearings are in place in the frame.
2.
Slide the rear of the Registration Roll Shaft through the rear bearing.
3.
Slide the front of the Shaft to the front bearing.
4.
Use one E ring to secure the rear of the Shaft to the rear bearing.
5.
Reinstall the Registration Chute.
4025-XXX
4-55
Repair Information