Feed All Bins Test - Lexmark W820 Service Manual

Feed All Bins Test

This test may be used to verify that the printer can feed media to all installed output
destinations. No information is printed on the feed test pages since the laser is not
engaged during this test.
After this test is selected, media is fed from the User Default Paper Source. The first piece
of media is fed to the standard bin. A second piece of media is fed to bin #1, a third to bin
#2 and so forth. The bin order is:
Standard Bin, Bin #1, Bin #2, Bin #3, Bin #4, Bin #5, Bin #6, Bin #7, Bin #8, Bin #9, Bin
#10, Bin #10, Bin #9, Bin #8, Bin #7, Bin #6, Bin #5, Bin #4, Bin #3, Bin #2, Bin #1,
Standard Bin, Standard Bin, Bin #1, Bin #2,...
During execution of this test, the following message is displayed. The Power indicator
blinks while pages are being fed through the printer and installed options.
All Bin Test
Feeding...
This test is only executed as a continuous test. This means to stop execution of the test,
the user must explicitly stop the test by pressing Return or Stop. Once the user stops the
test, the following message is displayed until all remaining media currently moving
through the paper path is fed to the appropriate output destination.
All Bin Test
Cancelling...
4025-XXX
3-17
Diagnostic Aids