Rear Cover Assembly
Removal
1.
Remove the AC power cord from the rear of the printer.
2.
Remove the two screws securing the Rear Cover Assembly to the printer frame.
3.
Pull the bottom of the Rear Cover away from the printer frame and slide the Cover
down to remove it.
Replacement
1.
Slide the top edge of the Rear Cover under the edge of the Top Cover, and then
press the Rear Cover against the printer frame.
2.
Slide the Cover down so the bottom edge catches the lip of the printer frame.
3.
Use two screws to secure the Rear Cover Assembly to the printer frame.
4.
Reconnect the AC power cord to the rear of the printer.
4025-XXX
4-9
Repair Information