Removal
1.
2.
3.
4.
Replacement
1.
2.
3.
4.
5.
4-18
Service Manual
Remove the paper tray from the appropriate feeder.
Swing the Chute down so it clears the Rolls.
Pull out on the Roll latch and slide the Roll off of the shaft.
Repeat step 3 for the remaining two Rolls.
Swing the Chute down so it clears the Rolls.
Position the Roll with the latch end facing out, and slide the Roll onto the shaft.
Rotate and push the Roll down the shaft until the latch locks the Roll into place.
Repeat steps 2 and 3 for the remaining two Rolls.
Reinstall the paper tray.
4025-XXX