Operation Procedure; Turning On The Air Conditioner; Ventilating Operation; Cooling Operation - Electra WNG 7 Service Manual

OPERATION PROCEDURE

TURNING ON THE AIR CONDITIONER

Press START/STOP button (1) to turn on the air condi t ioner on. Indicator (A) on
the air conditioner will light up,indicating that the unit is in operation.Note
that the LCDoperation display (13) will always show the last mode of operation
and previous function used.
Follow the instructions if you choose to change the control settings;otherwise,
the air condetioner will start and operate in the same mode and functions
prior to being turned off.

VENTILATING OPERATION

Select the ventilating mode by pressing MODE button (2). Switch to the
desired fan speed by pressing FAN speed button (4).

COOLING OPERATION

Select the COOLING mode by pressing MODE button (2). Switch to the
desired FAN SPEED or to AUTO FAN by pressing button (4). Select suitable
temperature setting.
COOLING OPERATION WITH AUTO FAN MODE
This operation starts with the highest air flow in order to quickly lower the
room temperature. It will then automatically switch to the low air flow to
quietly maintain the selected temperature.
HEATING OPERATION
Select the HEATING mode by pressing MODE button (2). Switch to the
desired FAN SPEED or to AUTO FAN by pressing FAN button (4). Select
suitable temperature setting.
HEATING OPERATION WITH AUTO FAN MODE
This operation starts with the highest air flow in order to quickly raise the
room temperature. It will then automatically switch to a lower air flow to
quietly maintain the selected temperature. HEATING with AUTO FAN will
automatically provide the user with the HOT KEEP function. The fan will be
turned off when the indoor coil temperature is not sufficiently hot to prevent
uncomfortable cold air drafts.
8
CONTENT