On-Unit Indicators And Controls - Electra WNG 7 Service Manual

ON-UNIT INDICATORS AND CONTROLS

6
CONTENT
A. Stand-by / Operation indicator
Lights up in red when
connected to power.
Lights up in green during
operation.
B. Fresh-air / lonizer indicator
Lights up when the fresh-air
or lonizer operation.
C. LCD operation display
D. Timer indicator
Lights up during timer and
sleep operation.
E. Filter indicator
Lights up when air filter
requires cleaning.
F. Signal receiver
Receiver signals from the
remote control.
G. Ionizer indicator
Lights up during the ionizer is
open.
H. Ionizer on/off
Used to swich the ionizer.
I Fresh-air on/off
J. Cooling indicator
Lights up only when mode
(M) is pressed.
K. Reset button
Press to turn off the filter
indicator or cancel the
buzzer announcer.
L. Heating indicator
Lights up when mode (M) is
pressed.
M. Unit mode button
Used to switch the unit for
cooling or heating without
the remote control.
N. Electrostatic filter safety button
Turn off the Electrostatic filter
when you open the grille.