Use Of Wireless Remote Control; Prior To Operation; Remote Control Holder - Electra WNG 7 Service Manual

USE OF WIRELESS REMOTE CONTROL

WIRELESS REMOTE CONTROL PUTS ALL
FUNTIONS AT YOUR FINGERTIPS.
Aim at the infrared signal receiver on the room air conditioner when operating.
The remote control signal can be received at a distance of up to about 8m.
Be sure that there are no obstructions between the remote control and signal
receiver.
Do not drop or throw the remote control.
Do not place the remote control in a location exposed to direct sunlight, or next
to a heating unit, and/or other heat sources.
Do not expose the signal receiver (F) on the display panel of the air conditioner
to a strong light such as fluorescent lamp or sunlight.
•• ••
CONTENT
PRIOR TO
OPERATION
Prior to operating your air
conditioner,make sure of
the following procedures:
Insert the plug of indoor
unit to power supply properly.
Indicator (A) on air conditioner
lights on, indicating air conditioner
is ready to receive signals from
remote control.
The red tab protecting the
remote control batteries has
been removed.
For clock setting,see page 11.
REMOTE CONTROL
HOLDER
Use the remote control in the holder
when unit is not in use.
Remote control can be slipped in or
out of its holder.
ON
OFF
AU TO
5