Advanced Features
•
Auto Configuration.
figuration data from another Access Point. This feature is enabled by default.
•
Auto Update.
The Wireless Access Point can automatically update its firmware, by downloading and
installing new firmware from your FTP server.
•
Command Line Interface.
This provides the possibility of creating scripts to perform common configuration changes.
•
NetBIOS & WINS Support.
Naming Service) allows the Wireless Access Point to easily fit into your existing Windows network.
•
Radius Accounting Support.
data on Wireless clients.
•
Syslog Support.
Syslog Server.
•
SNMP Support.
SNMP (Simple Network Management Protocol) is supported, allowing you to use a
SNMP program to manage the Wireless Access Point.
•
UAM Support. The Wireless Access Point supports UAM (Universal Access Method), making it suitable
for use in Internet cafes and other sites where user access time must be accounted for.
•
WDS Support. Support for WDS (Wireless Distribution System) allows the Wireless Access Point to act
as a Wireless Bridge. Both Point-to-Point and Multi-Point Bridge modes are supported.
The Wireless Access Point can perform self-configuration by copying the con-
If desired, the command line interface (CLI) can be used for configuration.
Support for both NetBIOS broadcast and WINS (Windows Internet
If you have a Radius Server, you can use it to provide accounting
If you have a Syslog Server, the Wireless Access Point can send its log data to your
3
Introduction