Table of Contents
Advertisement
Chapter 4
PC and Server Configuration
This Chapter details the PC Configuration required for each PC on the local LAN.
Overview
All Wireless Stations need to have settings which match the Wireless Access Point. These settings
depend on the mode in which the Access Point is being used.
•
If using WEP or WPA-PSK, it is only necessary to ensure that each Wireless station's settings match
those of the Wireless Access Point, as described below.
•
For WPA-802.1x and 802.1x modes, configuration is much more complex. The Radius Server must be
configured correctly, and setup of each Wireless station is also more complex.
Using WEP
For each of the following items, each Wireless Station must have the same settings as the Wireless Access
Point.
Mode
SSID (ESSID)
Wireless
Security
On each PC, the mode must be set to Infrastructure.
This must match the value used on the Wireless Access Point.
The default value is wireless
Note! The SSID is case sensitive.
•
Each Wireless station must be set to use WEP data encryp-
tion.
•
The Key size (64 bit, 128 bit, 152 bit) must be set to match the
Access Point.
•
The keys values on the PC must match the key values on the
Access Point.
Note:
On some systems, the key sizes may be shown as 40bit, 104bit,
and 128bit instead of 64 bit, 128 bit and 152bit. This difference
arises because the key input by the user is 24 bits less than the
key size used for encryption.
4
50
Advertisement
Table of Contents
